KM IMPIANTI
FIRE RESISTANT GRAPHITIC BASED HEAT EXPANDABLE GASKET
Code:
KM - FF107
The KM-FF gasket 107 is a graphitically based intumescent type heat expandable material. The KM-FF seal 107 is adhesively coated on one side, the adhesiveness being protected by a film to be removed during product application.
CONTACT US
CONTACT USPRODUCT SHEET
FORMAT
roll 50/100 mm high, 25 m long, 2 mm thick
EMPLOYMENT FIELDS
The KM-FF 107 gasket is used for filling fire collars, for sealing the empty space between the structural element and the fuel pipe, metal pipe and insulated metal pipe, for thermo-expanding filling of bags.
Some sealing systems involve the application of KM-FF seal 107 with KM BOARD V1 panel and KM SEALER F stucco.
MODALITY OF USE
Calculate the development of the KM-FF seal 107 and cut it to size with a cutter-type blade. Remove the protective film and wrap the gasket around the implant to be protected, taking care to insert it inside the through hole. Then seal the exposed surface of the gasket and any leaks between the gasket and the structural element with the KM SEALER F stucco.
Sealing is performed on both sides of the wall and on the underside of the attic.
CERTIFICATIONS
• According to the European Standard UNI EN 1366-3
CONTACT USroll 50/100 mm high, 25 m long, 2 mm thick
EMPLOYMENT FIELDS
The KM-FF 107 gasket is used for filling fire collars, for sealing the empty space between the structural element and the fuel pipe, metal pipe and insulated metal pipe, for thermo-expanding filling of bags.
Some sealing systems involve the application of KM-FF seal 107 with KM BOARD V1 panel and KM SEALER F stucco.
MODALITY OF USE
Calculate the development of the KM-FF seal 107 and cut it to size with a cutter-type blade. Remove the protective film and wrap the gasket around the implant to be protected, taking care to insert it inside the through hole. Then seal the exposed surface of the gasket and any leaks between the gasket and the structural element with the KM SEALER F stucco.
Sealing is performed on both sides of the wall and on the underside of the attic.
CERTIFICATIONS
• According to the European Standard UNI EN 1366-3
TECHNICAL DATA
• Color: dark gray
• Density: 630 kg/mc
• Free expansion: at 400ºC in 15 min
• Pressure: 14 bar at 400 ºC
• Flash point: non-flammable
• Compressibility: up to 30%
• Dangerous reactions: none observed
• Storage: in a closed environment not exposed to water and humidity
Transport: No restrictions by land, no ICAO/IATA-DGR restrictions
(not in direct contact with edible products)
FURTHER INFORMATION
• Precautionary measures: does not require any precautionary measures for either use or handling.
• Acute effects on exposure: none
• Classification/labeling: The material does not require any particular labeling.
• Risk phrases: none
• Cautionary advice: none
Data Sheet• Color: dark gray
• Density: 630 kg/mc
• Free expansion: at 400ºC in 15 min
• Pressure: 14 bar at 400 ºC
• Flash point: non-flammable
• Compressibility: up to 30%
• Dangerous reactions: none observed
• Storage: in a closed environment not exposed to water and humidity
Transport: No restrictions by land, no ICAO/IATA-DGR restrictions
(not in direct contact with edible products)
FURTHER INFORMATION
• Precautionary measures: does not require any precautionary measures for either use or handling.
• Acute effects on exposure: none
• Classification/labeling: The material does not require any particular labeling.
• Risk phrases: none
• Cautionary advice: none
